Pool Installation Process: How To Build A Pool In Your Backyard

Installing a swimming pool in your backyard can be an exciting and rewarding experience. 

Not only will you have the luxury of taking a dip whenever you like, but it also adds value to your home. With that said, installing a pool is no small feat and requires careful planning and attention to detail. 

This beginner-friendly guide will cover the major steps involved in a successful pool installation by conforming safety measures , so you can be sure to get it right. 

Introduction To Pool Installation Process

Pool installation refers to the process of constructing a swimming pool in your backyard. It involves several steps and requires specialized tools, materials, and knowledge. 

The installation process usually takes between four to six weeks depending on the size, shape, and type of pool being installed.

Excavation For Pool Installation

The pool installation process changes depending on the type of pool you want, available space,  and local regulations. This guide will go over the major steps involved in installing different kinds of pools.

Different Types Of Pools

Let’s talk about the different types of pools you can install in your backyard. There are 3 main types. Let’s explore them one by one 

Concrete Pools

Concrete pools are custom-built and take the longest time to install, usually around 6 weeks or more. 

They also require a high level of expertise and skill due to the intricate design process involved. 

Fiberglass Pools

Fiberglass pools are pre-made, meaning they can be installed faster than concrete pools. They also require less maintenance and fewer chemicals to keep them clean.

This type of pool is popular among homeowners who want to install a pool quickly and easily. These are commonly found in mass-produced, ready-to-install packages.

Fiver Glass Pool

Vinyl-Lined Pools

Vinyl-liner pools are constructed with a flexible liner that is stretched over the walls and floor of the pool. They are typically less expensive than concrete or fiberglass pools, which makes them more affordable.

They also require more maintenance due to their vinyl liner, which needs to be replaced every few years. 

Now that you know the different types of pools available, let’s move on to the installation process.

Pool Installation Process: Step-By-Step

The pool installation process is not as daunting as it may seem. With the right tools and materials, you can have your pool up and running in no time. Here are the major steps involved in a standard above-ground pool installation process:

Step 1: Site Preparation

The first step is to prepare the ground for your pool. This includes leveling the area, removing any debris, and ensuring the soil is adequately compacted. This step is especially important for concrete pools to avoid any structural issues down the line. 

Pool Installation Process

Step 2: Pool Construction

The next step is to construct the pool itself, which will vary depending on the type of pool you choose. For a concrete pool, this involves pouring and finishing the concrete walls, adding the plumbing, and installing the filter system. 

Step 3: Electrical Installation

The electrical installation process is important for all types of pools. This involves running a 240-volt line from your house to the pool area and connecting it to an appropriate power source.

Step 4: Finishing Touches

Lastly, you’ll add finishing touches such as tiles, coping stones, decking, or landscaping to give the pool its final look. Depending on the type of pool you choose, this may take anywhere from one day to several weeks. 

Inground Pool Installation Process

Once you’ve completed all the above steps, your pool should be ready for use. But before jumping right in, it’s important to ensure that everything is up to standard and that all safety regulations have been met. 

Inground pools must meet specific requirements in order to be approved by local authorities. 

These may include but are not limited to fencing around the pool area with a self-closing gate, having an emergency shutoff switch connected to the main power source, and making sure any electrical components included meet appropriate standards. 

Here’s how to build inground pools, in a nutshell: 

1. Prepare the ground and excavate the area according to your pool’s size and shape. 

2. Assemble the rebar frame for the walls of your pool, if applicable.

3. Install plumbing, electrical wiring, lighting, and other components as needed. 

4. Pour concrete into a mold to form the walls of your pool (if concrete) or lower a pre-made fiberglass pool shell into place.  

5. Connect any remaining components such as skimmers, pumps, etc., and fill in any gaps with grout or mortar if needed. 

6. Finish off with tiles, coping stones, decking, landscaping, or other aesthetic touches as desired 

7. Have it inspected and approved by local authorities. 

8. Test and clean your pool before use!

Fiberglass Pool Installation Process

Let’s now explore how to install a fiberglass pool.

Fiberglass pools are the easiest and fastest type to install, usually taking around one to two weeks. Let’s explore the fiberglass Swimming Pool Installation process!

The process involves digging a large hole with a backhoe, which is then filled with water before the pool is lowered into place.

Fiber Glass Setup For Pool

Once the pool is in position, you’ll need to connect it to a power source and fill it with water using a garden hose or a pump system. 

You should also add chemicals such as chlorine or algaecide for cleaning and sanitizing purposes. 

Lastly, you’ll want to make sure that your pool meets all safety requirements, such as fencing off the area and installing any necessary equipment like an emergency shutoff switch. 

Vinyl-Lined Pool Installation Process

Vinyl-lined pools are the most affordable and easiest to maintain, with an installation process that usually takes around two weeks. 

The first step is to create the pool’s structure by laying down a layer of sand and then positioning a steel or wooden wall around it. Once this has been done, you’ll need to secure the walls and shape them according to your desired design. 

You’ll then need to install the filter system and connect it to an appropriate power source before covering the walls with a vinyl liner. 

Vinyl Lined Installation

Once this is done, you can fill up the pool with water and begin adding chemicals for sanitization purposes. 

Lastly, you should make sure to comply with all local safety regulations, such as installing a fence and an emergency shutoff switch.

Concrete Pool Installation Process

Concrete pools are the most customizable and durable, but they also take the longest to install. It usually takes around six to eight weeks from start to finish. Here’s how to install concrete pools in your backyard:  

1. Design and plan the layout of your pool according to the size, shape, and desired features you want. 

2. Excavate the area according to your plan.

3. Install a rebar frame around the excavated area for extra strength and stability. 

4. Pour concrete into the indentation created by the rebar frame and shape it according to your plan. 

5. Install plumbing, electrical wiring, and any other components as necessary.

Concrete Pool

6. Cover the concrete with a waterproof coating or tile to protect it from weathering and wear and tear. 

7. Connect remaining components such as skimmers, pumps, etc., and fill in any gaps with grout or mortar if needed. 

8. Finish off with tiles, coping stones, decking, landscaping, or other aesthetic touches as desired. 

9. Have it inspected and approved by local authorities. 

10. Test and clean your pool before use! 

Which pool to choose between Fiberglass and Concrete? Check out this comparison, it will help you choose the right one for you.

Bonus: Pool Heater Installation

If you want to take your pool up a notch and make it even more enjoyable, installing a pool heater can be just the thing. 

Pool heaters come in two main types: gas and electric. Gas heaters are usually the cheaper option, but they require more maintenance. Electric heaters are typically more expensive upfront but have lower operating costs.

Pool Heater

Installing a pool heater requires some basic knowledge of plumbing and electricity, so it’s best to leave it to the professionals if you’re not sure what you’re doing. 

The installation process involves connecting the heater to your existing pool pump system, installing an appropriate power source (such as gas or electric), and connecting all necessary valves and controls. 

Once you’ve finished the installation, make sure to test it thoroughly before using it. And if you have any doubts or questions, always consult a professional. Every States has their own law of constructing swimming pool in Canada, read now to know them.

Professional Pool Installation Service

If you’re looking for an easier and quicker solution, then a professional pool installation service may be the best option. 

Professional pool installers will take care of everything from the initial design phase to the final inspection, making sure that your pool is installed correctly and up to code. They also provide helpful advice on how to properly maintain your pool in the future. 

In addition to hiring a pool installation service, it’s also important to make sure that your local regulations are being followed and that all necessary safety measures are in place. 

By opting for professional pool installation, you can rest assured knowing that your pool will be up and running quickly and safely.

Pool Installation Experts

If you’re looking for Premium Pool Installation Service here in Toronto, Citizen Plumbing is the best company to provide 24 hour plumber in Toronto. 

Our team of certified pool installers will make sure that your pool is installed correctly and up to code so you can enjoy your new backyard oasis for years to come. 

We also offer plumbing services like home renovation plumbing, Leak Detection & Repair, pipe installation/repair, Drain Unclogging, and many more. 

We provide the highest quality customer service and use only the best products to ensure your satisfaction at the best price possible. We are here for all of your general plumbing needs! 

Contact us today for a free consultation! 

Pool Maintenance Tips

Having a pool is great, but it does come with its own set of responsibilities. To make sure your pool stays in tip-top shape for years to come, here are some essential maintenance tips that you should follow: 

1. Keep the water clean by skimming the surface daily and brushing away any dirt or debris as needed. 

2. Vacuum your pool weekly to remove dirt, leaves, and other debris from the bottom. 

3. Check the pH levels of your water regularly and adjust as necessary. 

4. Clean the filter regularly (monthly or more often if needed) to make sure that it is functioning properly.  

5. Test the water for bacteria and other contaminants on a regular basis.  

6. Keep your pool area free of debris like leaves and branches that can enter the water and cause it to become dirty or contaminated. 

7. Maintain proper chlorine levels in the pool to ensure safety and prevent algae growth. 

8. Have a qualified professional inspect and service your equipment such as pumps, filters, skimmers, etc., at least once per season. 

Following these maintenance tips will help keep your pool clean, safe, and enjoyable for years to come. Happy swimming. Read how to find a professional plumber in Toronto.

Post Tags :

Master plumber, Professional Plumber

Share :

About Us

We’re Toronto’s Premier Plumbing & Heating Contractor specializing in all sorts of plumbing, drain cleaning, and HVAC maintenance and repairs.

Contact Us

We love to get in touch! Call or email us for a quick reply, or fill up the form with your custom message and we will get back to you within 2-3 hours.

Table of Contents